Zinc Phosphate Epoxy Primer

EPOXY ZINC RICH PRIMER

We offer Epoxy Zinc Rich Primer with high quality Zinc Dust to our valuable client which gives huge benefits over the normal Iron oxide. The Zinc pigment in dry film provides an excellent protection to steel surface, tanks, pipelines and plant components in both interior and exterior surfaces exposed to damaging conditions. It also provides catholic protection to steel and gives good resistance by undercoating of damaged areas. It can be over coated with wide range of top coats.

Technical Data:

• Composition: Epoxy Resin Pigmented with Zinc Dust
• Color: Grey
• Finish: Matt
• Mixing Ratio:  4:1 by Volume
• Recommended DFT: 50-60 microns
• Zinc Dust Content on DFT 90+2%
• Theoretical Coverage: 13 to 15 sq. met. at a recommended DFT
• Application: Airless spray or brush
• Pot Life: 2 to 3 hours at 30 C
• Shelf Life: 06 months (of individual components)
• Drying: Surface Dry:10-15 minutes, Hard Dry: 1 to 2 hours, Full cure: 7 Days
• Over coating Interval: Overnight
• Maturation Time On Mixing: 10-15 mins
• Spraying Viscosity: 20+2"/FC - 4 at 30 C
• Temperature Resistance: 300 C dry heat
• Flash Point: Above 25 C
• Compatibility: Tack-free: Can be over coated with all type of paints