Cold Weld Products

At Jyoti Innovision, we take pride in being a leading manufacturer of high-performance anti-fouling paint, designed to deliver superior protection and long-lastingresults for marine and industrial surfaces. Our anti-fouling paint is engineered with advanced technology to prevent the accumulation of marine organisms on submerged surfaces, extending the lifespan of your vessels, structures, and equipment. With a lifespan of up to 180DAY, our product offers reliable and durable protection, ensuring your assets remain in optimal condition.

 Key Features and Benefits

- Superior Bonding to Wood and Steel Surfaces.

- Excellent Anti-Fungal Properties

- Easy Application Process

- Faster Curing Time

- Long-Lasting Performance

JYOTI SURFACE RENEWAL CERA-METAL PUTTY PRODUCT is high performance 100% solid epoxy based material that cures at room temperature and is designed for Leak Seal, Patch work, Gap filling, metal surface rebuilding & for strong bonding with steel & concrete surface.

FEATURES

· Easy to apply on almost all metal with clean surface at any position /location.

· Bonds to with relative product like Mild steel, Cast iron, ceramic surface.

· This is partially machine able.

· Excellent Corrosion resistant properties.

· It is Replacement of General purpose Epoxy putty stick

· Economical and Multipurpose application.

· High temperature resistant up to 125 °C

We are manufacturing general purpose usage Epoxy Adhesive for construction application, General Bonding Application etc.

Range of Our Product for Adhesive & Grout are Alumina Bond Normal & Fast dry, Epoxy Adhesive, Epoxy Clear Coat, Epoxy Grout.

Kindly share with us your application and requirement. So we are able to give proper suitable product and quote for the same.

We Jyoti Innovision Private Limited Speciallized To Produce Epoxy Grouting In Different Shades. Our D Coat Epoxy Grouting Is Very Much Effective At Any Weather Conditions. It Is Available In 1kg, 5kg, Packing Of 3part.
We Offer For Distributorship Or Bulk Purchasing Of Epoxy Grout

PRODUCTION DESCRIPTION:  

JYOTI EPOXY is a stain free, color fast chemical for ceramic resistance 100% solid epoxy grout for ceramic tile, vitrified tile, marble and stone 

APPLICATION:

JYOTI EPOXY is ideally suited for residential and commercial installations were materials must resist physical abuse, shock and chemical attack.

CAUTION:

This production can be irritating to eyes and skin. Avoid prolonged contact with eyes and skin. In case of direct contact with eyes, wash eyes immediately with water and seek medical attention quickly, do not swallow. KEEP OUT OF REACH OF CHILDREN.

ADVANTAGES:

·       Good resistance to abrasion and 100% Stain Free

·       Strong & Durable

·       Chemical & Temperature Resistant

·       Anti-Bacterial & Anti-Fungal

·       Stain free Grout Floor & Wall

·       Various colors and easy to apply

·       Resin Kit consists of part a hardener (90 g) part B Resin (180 g), Scrub pad and a pair of gloves. Part C Filler powder (730 g)

METHOD OF APPLICATION:

Before grouting the joints should be dry. The surface must be cleaned and made free of any dust or deleterious matters. The base and hardener shall be mixed together in a container to get a uniform consistent mix. The filler shall be added to the solution and mixed with a slow speed drill till a uniformly colored and homogenous grout is obtained.

The mixed grout shall be filled into the joints using a spatula. Care shall be taken to ensure the joints and around the edges are filled properly. Any surplus material shall be cleaned off with a damp sponge or cloth. The cleaning shall be done before the material gets. Otherwise mechanical cleaning may be necessary.

SHELF LIFE:

10 months in sealed container if stored below 35 Degree centigrade.

PACKING:

5, 10, 15 and 20Kg

FOLLOW INSTALLATION INSTRUCTION INSIDE UNIT.

COVERAGE:    Approximate Sq.Ft. coverage per #1/5^th kg unit       

Quantities shown are approximate and are given for estimating purposes only, Actual job site coverages may way.

NOTE: it is always good practice when calculating coverage to allow for 10% additional material for waste and spillage

Shake well and pour several drops to suede applicator. Apply to 3x3 sq. ft. area of vehicle using a cross-hatch pattern with slight overlap to level product. Allow the coating to cure for 5-10 minutes and gently remove excess product using a clean suede cloth or low nap microfiber towel. Do Not allow coating to come in contact with water for 48 hours while curing. Apply additional coats with at least one hour between applications. Do Not apply in direct sunlight or to a hot surface. Cure time is dependant on environmental conditions - test product on a small inconspicuous area first to gauge cure time.

PREPARATION:

To ensure long term performance of Coating, the proper preparation of the surface is of utmost importance & the procedure of surface preparation depends upon the severity of the application, expected service life and surface condition. A thoroughly clean abraded surface will hold the applied coating compound firmly.

JYOTI SURFACE RENEWAL METAL PUTTY PRODUCT is high performance 100% solid epoxy based material that cures at room temperature and is designed for Leak Seal, Patch work, Gap filling, metal surface rebuilding & for strong bonding with steel & metallic surface.

FEATURES

·  Easy to apply on almost all metal with clean surface at any position /location.

· Bonds to with relative product like Mild steel, Cast iron, Metal surface.

· This is machine able to metallic finish.

· Excellent Corrosion resistant properties.

· Resistant to chemicals including most acids, bases, solvents and alkalis

· Available in Paste format

· High temperature resistant up to 150 °C

Applications

Major applications to repair engineering equipments, Strengthening to welded joints, Patch work and resurfacing of Cast iron body parts, use in Ceramic, Mining, Cement, Thermal Power, Petrochemicals, Tanks, Pulp & Paper, Fertilizers, Pump, Valves, Bearing house, Transformer, Shaft, and wherever Solutions are required for Surface rebuilt or repairing work is required.